The Wolf Tooth Remote Dropper Lever solves common dropper remote complaints with it's compact, ergonomic and sturdy design. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight Wolf Tooth Remote Dropper Lever leads in every category. Wolf Tooth Remote Dropper Lever Features UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seat post using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here. High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Wolf Tooth Remote Dropper Lever Compatibility Compatible with all cable actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.  If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best.  If it is less than 52mm, the Standard ReMote will work best. ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps. ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Our ReMote is designed to work  with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to our ReMote base.   Contact Wolf Tooth customer service for other post compatibility questions. Wolf Tooth Remote Dropper Lever Mounting Types ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware