The Wolf Tooth Remount Clamp was created because manufacturers' need to accommodate front levers invariably leads to compromise - Wolf Tooth address this with their range of specified ReMount Clamps. Wolf Tooth love their dropper posts. Their remotes? Not so much. It's not that they're bad - just that manufacturers' need to accommodate front shifters invariably leads to compromise. The result is levers that sit out of reach, force the hand to unwrap from the bar, and ask the thumb to move in strange ways.  The ReMount product line addresses these issues by turning most cable-actuated dropper remotes on their side.  When used with one-by cockpits, this moves the remote lever from inboard of the brake lever to roughly where a front shifter's thumb paddle would normally sit. The ReMount's generous 30mm length and offset clamp allow you to find a remote position that keeps more of your hand on the bar and more of your mind on the trail. Wolf Tooth Remount Clamp Compatibility The ReMount is designed to work with cable-actuated dropper and shock remotes with pivots parallel to the handlebar center We do not recommend the ReMount for RockShox Reverb remotes. We do not recommend the ReMount for multi-chainring drivetrains (it sits where your front shifter does) Remount 22 Specific The ReMount mounts securely to all standard (22.2mm) mountain bike handlebars Remount MM Specific The ReMount is designed to work with cable-actuated dropper and shock remotes with pivots parallel to the handlebar center The ReMount MM mounts securely to all MatchMaker X (MMX) compatible SRAM and Avid brake levers TheReMount MM can be mounted to the underside of top/left RockShox MMX hydraulic lockouts SRAM's MatchMaker X T-nut and matching Torx screw (pictured in gallery) are required for mounting The ReMount MM is available with genuine MatchMaker X hardware if needed ReMount IS-AB Specific The ReMount IS-AB mounts securely to all Shimano I-Spec A and I-Spec B left brake levers Not all provided hardware will be required for each standard ReMount IS-II Specific The ReMount IS-II mounts securely to all Shimano I-Spec II (11-speed generation) brake levers Wolf Tooth Remount Clamp Specifications Weight: 22 - 20g, MM - 19g, IS-A - 15g, IS-B - 16g, I-Spec II - 16g Material: Aluminum, Delrin, and Stainless Steel Hardware Mostly made in the USA (60%)