Trend PRT/L Professional Router Table 115V Professional portable router table with aluminium table surface and back fence for floor & bench mounting use. Back fence squareness adjustment for absolute accuracy. T11E quick release fixing holes for fixing T11 fixing kit. Bench leg level adjustment when mounted on a bench. 20mm hole for the T11 Quick Raiser adjuster handle.Floor or bench standing with removable legs and adjustment for uneven floors. Extruded 8mm thick aluminium alloy table top with minimal loss of cutter depth. Cutter aperture of 90mm allows use of the largest router cutters available. Cast back fence with extruded adjustable alloy cheeks and \'T\' slots. Made to EN standards, with back fence accuracy of 0.5 degree & table flatness of 0.5mm. With a suitable size and weight enabling easy re-positioning around the workshop & transportation for on-site use.Router, fine height adjuster and spelch block not included.Removable centre plate of table will need to be re-drilled for other makes and models of medium & heavy duty routers.Router not included.Ideal for site use.115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.Specification-Rating=Professional/TradeTable size=650 mm x 550 mmBench height=350 mmHeight with legs=830 mmRouter cutter aperture=90 mmInsert ring size=20 mm, 35 mm, 54 mm, 68 mmBack fence height=110 mmDust spout aperture=57 mmWeight=25kgVoltage=115vPlug=16ampMax. load=1850w @ 13.5ampSupplied with 16A BS4343 plug and socketEnd of life=See below for Environmental Policy linkNot intended for continuous production or production line use.115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.