Makita DLX2214TJ 18v LXT Brushless Cordless DHP481 Combi Drill & DTD170 Impact Driver Twin Kit inc 2x BL1850B 5.0Ah Batteries & DC18RC Charger in Makpac Type 3 Carry Case Makita DLX2214TJ Power Tool Kit 18v brings together two market leading power tools from the professional Makita Power Tool range. This kit includes a DHP481 Combi Drill plus DTD170 Impact Driver powered by 2x 18v 5.0Ah lithium batteries and charger, all packed into a useful MakPac Type 3 Carry Case. DHP481Z Combi Drill FEATURES Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge Forward/reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand Electric brake Twin LED job light with afterglow 2 mechanical gears Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Compact overall length of 205mm XPT - Extreme Protection Technology SPECIFICATION Voltage: 18v Battery Compatibility: 18v Lithium-Ion (LXT) Power Output: 640 w Soft Application Max Torque: 60 Nm Hard Application Max Torque: 115-125 Nm Torque Settings: 21 + Drill Brake Type: Electric No. of Gears: 2 LED Job Light: Yes / Twin / After-glow Battery Capacity Indicator: Yes Rotation: Forward / Reverse Variable Speed Control Trigger: Yes No Load Speed High: 0-2100 rpm No Load Speed Low: 0-550 rpm Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal Chuck Capacity: 13 mm Screw Capacity: Machine Screw: 6 mm Screw Capacity: Wood Screw: 10 x 90 mm Drill Capacity: Concrete: 16 mm Drill Capacity: Metal: 13 mm Drill Capacity: Wood: 76 mm Impact Rate High: 0-31500 bpm Impact Rate Low: 0-8250 bpm Overall Length: 205 mm Net Weight (Approx) with 1.5/2Ah Batt: 2.5 kg Net Weight (Approx) with 3/4/5Ah Batt: 2.7 kg NOISE & VIBRATION Sound Pressure Level (LpA): 85 dB (A) Sound Power Level (LWA): 96 dB (A) Sound Uncertainty (K): 3 dB (A) Drilling Concrete Vibration Emission (ah): 6.5 m/s² Drilling Concrete Vibration Uncertainty (K): 1.5 m/s² Drilling Metal Vibration Emission (ah): 2.5 m/s² Drilling Metal Vibration Uncertainty (K): 1.5 m/s² DTD170Z Impact Driver FEATURES New impact mode, \'Assist-Mode\' drives slowly to start screw before full tightening to eliminate \"screw cam-out\" and \"cross threading“ TEK mode (\'T-mode\') reduces impact power during final stages of fastener seating Electronic 4-stage impact power selection Massive 175 Nm max tightening torque More compact body with overall length of just 117mm and lightweight at only 1.5 kg Brushless DC motor with high power to weight and size ratio Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications One touch sliding chuck for easy bit installation and removal Twin LED job lights with pre-glow and afterglow features Ergonomic soft rubber grip design for vibration absorption and comfortable operation Variable speed control by trigger with electric brake SPECIFICATION Voltage: 18v Battery Compatibility: 18v Lithium-Ion (LXT) Max Torque: 175 Nm Brake Type: Electric LED Job Light: Yes / Twin / Pre-glow / After-glow Battery Capacity Indicator: Yes Rotation: Forward & Reverse Variable Speed Control Trigger: Yes / + 4-Stage Impact Power Selection No Load Speed: Max: 0-3600 / H: 0-3200 / M: 0-2100 / S: 0-1100 rpm Machine Screw Capacity: M4-M8 Standard Bolt Capacity: M5-M16 High Tensile Bolt Capacity: M5-M14 Coarse Thread Length Capacity: 22-125 mm Max Impacts Per Minute: 4 Stages as below: Max: 0-3800 / H: 0-3600 / M: 0-2600 / L: 0-1100 ipm Driving Shank: 1/4\" Hex Overall Length: 117 mm Net Weight (with 1.5/2Ah Battery): 1.2 kg Net Weight (with 3/4/5Ah Battery): 1.5 kg