Makita DLX2372TJ 18v LXT Twin Kit - DTW300Z Impact Wrench & DHR242 SDS+ Hammer Inc 2x 5.0Ah Batteries, DC18RC Compact Charger & MakPac Connector Case Type 4 The Makita DLX2372TJ 18v twin pack is an excellent kit for any professional tradesman, both tools feature brushless motors for longer run time and require virtually no maintenance. This kit comes with 2x 5.0Ah 18v Batteries and a DC18RC 14.4-18v Battery Charger in a MakPac Connector Case Type 4. Please note, the MakPac Connector Case Type 4 does not come with an inlay - sold separately. The DHR242 is the jewel in the 18v rotary hammer range, it is lightweight, compact and well balanced, has a drilling capacity of 24mm and 3 functions including rotary hammer, rotary only and hammer only for chiselling.  The Makita DTW300 is a cordless 1/2 inch impact wrench that provides improved fastening control - ideal for automotive, installation, and fabrication trades.  Makita DHR242Z 24mm SDS+ Plus Rotary Hammer Drill FEATURES Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200 One touch slide chuck for SDS-plus bit Easy-to-grip handle Ergonomically designed to give maximum power thrust Provides a sure and comfortable grip in any operation 3 mode operation: Rotation + Hammering, Hammering only & Rotation only The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges SPECIFICATION Max in Steel: 13 mm Max in Wood: 27 mm Max in Concrete: 24 mm No Load Speed: 0-950 rpm Blows per Minute: 0-4,700 bpm Single Impact Energy: 2.0J Vibration: 15/sec2 Charging Time: Approx 22 min Net Weight: 3.3 kg Makita DTW300Z LXT 1/2\" Impact Wrench  FEATURES Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application 3 forward and 3 reverse Auto-Stop modes for increased efficiency 4 Stage power selection for optimum rpm and fastening torque 330 Nm of Max Torque and 580 Nm of Nut-Busting Torque XPT technology that protects against dust & moisture LED Job light with pre-glow and after-glow functions Compact and ergonomic design at only 144 mm long Rubberised soft grip provides increased comfort on the job Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating SPECIFICATION Voltage: 18v LXT Driving Shank: 1/2\" Square Max. Fastening Torque: 330 Nm Nut Busting Torque: 580 Nm Blows per Minute (Hi): 0 - 3400 ipm Blows per Minute (Med): 0 - 2600 ipm Blows per Minute (Lo): 0 - 1800 ipm Standard Bolt: M10 - M20 High Tensile Bolt: M10 - M16 No Load Speed (Max): 0 - 3200 rpm No Load Speed (Hard): 0 - 2600 rpm No Load Speed (Med): 0 - 1800 rpm No Load Speed (Soft): 0 - 1000 rpm Net Weight: 1.5 - 1.8 kg NOISE & VIBRATION Noise Sound Pressure: 97 dB(A) Noise Sound Power: 108 dB(A) Noise K Factor: 3 dB(A) Vibration Fastening Bolt: 12.5 m/sec² Vibration K Factor: 1.5 m/sec²