Makita DHR202ZJ 18v LXT SDS+ Plus Rotary Hammer 20mm Body Only In Makpac Type 3 Carry Case with Inlay Tray The Makita DHR202ZJ is a 3-Mode SDS+ Plus Drill with built-in torque limiter. The clutch on the DHR202 disengages if your drill bit jams. More compact and lighter than its predecessor, the BHR202Z, at 330mm long & weighing 3.2 kg. Supplied as body only in a Makpac type 3 carry case with inlay tray, ready to add batteries and charger (sold separately). Also included is a depth stop and side handle. MAKITA DHR202ZJ FEATURES 3-Mode Switch for rotation only, hammering with rotation, or hammering only 2x faster drilling with synchronized RPM and BPM for more efficient drilling Built-in torque limiter clutch disengages if bit jams when hitting rebar Chisel rotates 360° with 40 different positions to get the best working More compact design at only 330mm long and weighs only 3.2 kg for less operator fatigue Ergonomic shape fits like a glove with even pressure and easy control LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) Electric brake Forward/reverse rotation Job light built into handle for best visibility when in use Rotary hammer action Rotary only action Variable speed trigger MAKITA DHR202ZJ SPECIFICATION Voltage: 18v LXT Shank Type: SDS+ Plus Capacity in Concrete: 20mm Capacity in Steel: 13mm Capacity in Wood: 26mm Impacts per Minute: 0-4,000 ipm Impact Energy: 2.0 J No Load Speed: 0-1,100 mm Overall Length: 358 mm Net Weight: 3.5 Kg Carbon Brush: 441 DHR202ZJ NOISE & VIBRATION Vibration: Drilling: 3 m/sec² Vibration: Chiselling: 11 m/sec² Vibration: Hammer Drilling: 145 m/sec² Vibration K Factor: 15 m/sec² Noise Sound Pressure: 87 dB(A) Noise Sound Power: 98 dB(A) Noise K Factor: 3 dB(A)