Evolution S185CCSL 185mm Circular Saw With TCT Mild Steel Cutting Blade 110v Slice through bar, angle, profiled tube and sheet metal in seconds with the S185CCSL metal cutting circular saw. Faster and cleaner than an abrasive cutter, the S185CCSL gives your ready to weld cuts that are cold enough to handle straight off the saw. Recognised as the metalwork fabricator\'s friend, the S185CCSL has been tested back to back against band saws, grinders and even plasma cutters and it comes out on top each time for speed of cut and ease of use. Supplied with 1x 185mm 40T Mild Steel Cutting Blade (M185TCT-40CS).  FEATURES Equipped with a 185mm, 40 tooth mild steel capable blade. Providing an instantly workable finish and produces virtually no heat, no burr, and no sparks The paddle levers allow you to easily adjust the base plate to perform up to 45° accurate bevel cutting Adjusting the rear paddle lever enables you to set the base plate in a higher position giving you a cutting capacity up to 2 - 1/2 inches Fitted with a clear glass window you can see when standing in the normal cutting position where the blade meets the material being cut, ensuring your blade is exactly aligned with the cutting line Channeled air-flow directs air to the cutting line, clearing it from any debris A parallel edge guide is provided for even greater straight cutting assistance One of the lightest circular saws on the market Cut mild steel, stainless steel, aluminium and wood with the optional premium blades available SPECIFICATION Motor 110v: 1600W No Load Speed: 3700 rpm Max. Bevel Left: 45° Circular Saw Base: Pressed Steel Cord Length: 3m Blade Diameter: 185mm (Blade Included) Number Of Teeth: 40 Bore: 20mm Kerf: 2mm Max. Depth Cut 0°: 64mm Max. Depth Cut 45°: 35mm Product Weight: 5.2 kg NOISE & VIBRATION Sound Pressure Level LPA: 92.9 dBA K:3 BA Sound Power Level LWA: 103.9 dBA K:3 dBA Vibration: ahM=3.041m/s2 ahW=3.697m/s2