Shadow Foam Basic Cutting Pack CONTENTS 1x Scalpel Handle 5x Scalpel Blades 1x Shadow Foam Sticker  1x Shadow Foam Cutting Kit Instructions FEATURES 1x Sclapel Handle - Standard scalpel handle for use with the included scalpel blades 5x Scalpel Blades - To ensure that you aren’t using a dull blade, we include a pack of five interchangeable blades 1x Shadow Foam Sticker - Give Shadow Foam some love! Put a nice, shiny Shadow Foam sticker on your tool box 1x Cutting Instructions - A handy guide so that you’ll be a foam cutting expert as soon as you start cutting Shadow Foam was designed to be the ultimate solution to create amazing custom foam liners. However, there are still things you have to consider to get a professional, high-quality finish: INSTRUCTIONS Step One: If necessary, cut your foam down to the required size. Create a layout of your tools by laying them on the top of the foam. You should leave at least 5mm between items. Once you’re happy with the layout, take a picture as a reference Step Two: Remove all of the tools except the one you’re cutting first. We recommend starting in a corner. Lightly press on the item, so it doesn’t move. Trace cut around the item, keeping the knife perpendicular and as close to it as possible. Once you meet the original cut mark, remove the item and cut again to the desired depth Step Three: Peel back layers until you reach the required depth. It is easier to pull from a point than a long edge. If you are finding it difficult to peel then you may not have cut the profile deep enough. The peeling of the foam is more of a ‘ploughing’ action. You need to follow the peel and dig your fingers through the foam as you follow the shape of the tool Repeat: The process is the same for the rest of your items. Ensure that you keep checking the layout so you don’t run out of room for all of your items