Applicationuniversally applicable for almost all cars Suitable for checking pressure and vacuum systems such as: Checking charging pressure, vacuum solenoid valves, tank ventilation, MAP sensors, etc.Specification- Condition: brand new - Withdrawal Guaranteed - Warranty: one year warranty for any manufacturing defect - ready to ship 1xBrake vent pressure pump vacuum pump brake vent pressure tester hand car Product type: Car brake vent Material: plastic, metal Installation: universal for most cars Thanks to extensive accessories (accessory caps and inserts) can also be used as brake vents Print display range: +0 to +3 bar Vacuum display range: -0 to -0.8 bar 63.5 mm pressure/ vacuum manometerFeatureIncluded in the scope of delivery: long hose: outer diameter: 9.5mm, inner diameter: 6mm, length: 60cm including 2 pieces 120 ml vent container Hoses each with a length of 90, 75, 60 mm and 2 pieces 550 mm Adapter 90° Vent nipple 2 pieces 7.5 mm, 1 piece 6 mm inner diameter Adapter cone 8 pieces in different diameters and lengths Adapter 1 piece from 7 to 5 mm diameter Adapter 1 piece diameter 35 mm 1x Plastic storage compatible for case Venting: 1. Make sure that the storage tank from the main brake cylinder is full and the container is open. 2. Connect the 50 mm long plastic hose to the lid of the vent container and place the lid on the vent container, the short hose must now be in the container. 3. Connect the other 50 mm long hose 5. When venting, follow these manufacturer\'s guidelines. Generally, venting is in the following order: A. Start with the wheel cylinder located the farthest away from the main brake cylinder, then the one at 2 farthest away, etc. For left-hand-driving vehicles the order is usually: rear right, back left, front right and last front left. B. Place the vent pipe on the vent nipple of the wheel brake cylinder or brake caliper. C. Pump 10-15 times until a vacuum is created. D. Open the vent nipple until the brake fluid flows through the hose without bubbles. NOTE: Operation C and D may repeat several times must be made. 6. Check the brake fluid level in the reservoir before venting the next wheel brake cylinder or caliper. 7. Important: Finally check the brake fluid level, fill it up if necessary.Note- It is an aftermarket tool, it serves as a replacement of the original tool. - Instructions are not encased. We recommend a professional installation. - If you have any questions, please feel free to contact us at any time. - Box Color: The color of the box is random