Use The Trend KWJ900 Kitchen Worktop Jig for precise and accurate joints The Trend KWJ900 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all-in-one jig for joining worktops up to 900mm wide with a router.  Features:    Engraved markings for identification of pinholes  Comes with pins made from ABS plastic for strength Engraved lines for short 65mm bolts and worktop cross-cut  Three open-ended bolt recesses (dog bone style) for 150mm bolts Cuts up to 40mm thick worktops with or without anti-drip post formed edge  Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops  10mm diameter plastic pins with tapered shoulder for tight fit provides three-point pin contact to ensure ease of setting up  Left hand and right-hand corners, 400mm radius peninsular joint, 45-degree end cut with slight radius, 45-degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps  9 Functions:   Male cut Female cut 45° end cut Curved peninsular  45° mitre corner joint  R40mm corner radius  Connector bolt recess  R100mm corner radius  35mm circular hinge and 3/4\" BSP hole   Specification:  Weight: 8.2kg Width: 390mm  Length: 1185mm Thickness: 12mm End Cut 45 degrees  Corner Radius: 40mm  Corner Radius: 100mm  Corner Radius: 400mm Corner Mitre Joint: 45 degrees