A drill and impact driver set suitable for trade professionals and DIY hobbyists alike. Both tools feature a fully brushless motor for the highest power output Contents: DHP481 Combi Drill DTD154 Impact Driver 2 x 5Ah li-ion Batteries Battery Charger Makpac Size 3 Carry Case Side handle/depth stop for combi drill DHP481 Features: Single sleeve keyless chuck allows for easy bit installation/removal by one hand Brushless motor Electric brake Twin LED job light with afterglow 2 mechanical gears Forward/reverse rotation Battery fuel gauge Variable speed control by trigger Best possible ergonomic handle for drill-driver applications Compact overall length DTD154 Features: T-mode: Tightening mode for self-drilling screw Electronic 3-stage impact power selection (Hard/Medium/Soft) Brushless motor One touch sliding chuck for easy bit installation and removal LED job light Ergonomic soft grip Electric brake Variable speed control by trigger Forward/reverse rotation Compact overall length Specification: BL1850 Battery 196673-6 Battery: 5.0 Ah Battery Type: Li-ion Voltage: 18 v Makpak Connector Case Type 3 821551-8 Length: 396 mm Width: 296 mm Height: 210 mm Charger DC18RC Battery Range: 14.4 - 18 v Battery Type: Li-ion DHP481 Chuck Capacity: 1.5 - 13 mm Blows per Minute (Hi) - ipm: 0 - 31,500 ipm Blows per Minute (Lo) - ipm: 0 - 8,250 ipm No Load Speed (Hi): 0 - 2100 rpm No Load Speed (Lo): 0 - 550 rpm Max. in wood: 76 mm Max. in masonry: 16 mm Max. in steel: 13 mm Torque Settings: 21 + drill Vibration K factor: 1.5 m/sec_ Maximum Output: 640 w Max. Fastening Torque (Soft Joint): 60 Nm Max. Fastening Torque (Hard Joint): 115 Nm Vibration: Impact drilling into concrete: 6.5 m/sec_ Vibration: Drilling into metal: 2.5 m/sec_ Weight (with batteries): 2.7 kg DTD154 Standard Bolt: M5-M16 High Tensile Bolt: M5-M14 Coarse thread (length): 22 - 125 mm Max Fastening Torque: 175 Nm Vibration: Fastening Bolt: 12.5 m/sec_ Vibration K factor: 1.5 m/sec_ Noise sound pressure: 96 dB(A) Noise sound power: 107 dB(A) Noise K factor: 3 dB(A) Net weight: 1.5 kg Impact Selection: 3 stage + Tek mode Driving Shank: 6.35mm (1/4\") Hex Blows per Minute (Hi) - ipm: 0 - 3800 ipm Blows per Minute (Med) - ipm: 0 - 2600 ipm Blows per Minute (Lo) - ipm: 0 - 1100 ipm Machine Screw: M4-M8 No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm