The Draper 98446 Bandsaw tilts with a 0-45 degree range The Draper 98446 is a quality bench-mounted bandsaw built to a high specification and ideal for trade professionals. The 98446 is designed to cut wood, wood-derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45° range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories. Features: Table tilting with 0-45 degree range Adjustable blade tensioning and tracking for precise cutting Supplied with 10tpi blade, parallel rip fence and other accessories Fitted with a no-volt on/off switch and 53mm dust extraction outlet Mitre guide for crosscut work. Graduated to 30 degrees for both left and right-hand angles Comes with: 1x Hex key 1x Push stick 1x 10tpi blade 1x Parallel rip fence 1x Open-ended spanner Specifications:  Input: 300W Weight: 19kg Voltage: 240V Frequency: 50Hz Cutting depth: 90mm No load speed: 1400rpm Maximum capacity: 125mm Maximum throat capacity: 228mm Table size: 300 x 300mm (Tilt to 45°) Cutting speed: 10.6m/sec (635m/min) Bandsaw dimensions: 510 x 370 x 755mm