GYS Toparc Mig Torch and 4m Cable 250a (Steel) The MIG 25 torch is suited to the manual MIG / MAG welding processes. Comes with a 4 metre cable. The torch must be fitted with the appropriate consumables, selected based on the application and selected current. Using the wrong consumables will result in poor cutting, excessive use of consumables and possibly prevent the machine from working. Precautions for use: Never wrap the welding leads around your body Do not use the torch to move the welding power source or wire feeder The torch must be fully uncoiled to prevent overheating Switch off the generator after the torch is cooled and before each maintenance and before replacing or control wearing parts Regularly check the condition of the torch. If damaged, the torch must be replaced Specifcation:  Contact Tube: Diameter 1.0 Steel Process: MIG / MAG (GMAW / FCAW) Rated current / Corresponding duty cycle: 240 A / 60% Cooling mode: Air Connections: EURO Gas protection: 230 A CO2 / 200 A Mix Gas flow: 10-25 L/min (2.64/6.60 US gpm) Cable length: 4 Metres Cross section: 25 mm² Functionning temperature: -10 to +40°C Applied standard: IEC 60974-7