This complete package from Trend contains the T10EK Router, KWJ900 Worktop Jig and BR01X1/2TC Worktop Cutter 12.7mm Diameter This Trend set, exclusive to Toolstop contains everything you will need for cutting worktops. Contains the T10EK Router, KWJ900 Worktop Jig and BR01X1/2TC Worktop Cutter with 12.7mm diameter. The KWJ900 is a hard-wearing 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. The BR01X1/2TC is a two-flute straight cutter with a half-inch shank, suitable for a wide range of applications such as engraving, grooving rebating and shallow mortising and the T10EK is a powerful router that is up to any task. T10EK Features: Electronic full wave variable control of spindle speed under load for a fine finish on all types of material Soft start eliminates sudden movement of machine on start-up Two-column precision base with large phosphor bronze bushes for plunging accuracy Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank 3-position revolving depth stop for fast adjustable settings Adjustable inner plate for guide bush accuracy KWJ900 Features: Left hand and right hand corners, 400mm radius penisular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops Cuts up to 40mm thick worktops with or without anti-drip post formed edge Three open-ended bolt recesses (dog bone style) for 150mm bolts Engraved lines for short 65mm bolts and worktop cross-cut 10mm diameter plastic pins with a tapered shoulder for tight fit provides three-point pin contact to ensure ease of setting up Engraved markings for identification of pinholes BR01X1/2TC Features: Two-flute straight cutter with a half inch shank 50mm depth of cut 90mm length 12.7mm diameter cut TCT for long life and lasting sharpness T10EK Specification: Plunge stroke: 0-80 mm Power input: 2000w Power ampage: 9.6amp No-load speed: 8-20000rpm Dust spout size: 35mm Cutter diameter max: 50 mm Sound pressure Lpa: 93.0 dB(A)1 Acoustic pressure Lwa: 102.0 dB(A)2 Hand-arm vibration: