Proxxon TG 250/E Disc Sander Coolant Container and tray as shown are not included but are available as separate items. With electronic speed control from 250 to 750rpm. Also for wet sanding. Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. Includes chart for recommended speeds on different materials. Main body of ribbed die-cast aluminium Table of die-cast aluminium with machined surface. The Proxxon tg 250/E tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). Machined backing disc - driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. disc diameter 250mm. Max A dust collection adapter for attaching a vacuum cleaner/dust extractor is included. 220 - 240V with drive via toothed belt (reduction ratio 7.3:1). Electronic speed control approx. 250 - 750rpm Maximum sanding height 135mm, table 275 x 105mm. Suppled with a mitre fence and 2 each sanding discs of 100grit and 240grit. Equipped with vacuum cleaner adapter for working in a clean, dust-free environment. Overall size without table 330 x 280 x 230mm