The Creda Solfan CSF3 3kW Wall Mounted Fan Heater will rapidly heat small commercial units. They will also circulate air on warm summer days. They can be fixed to the wall using the adjustable wall bracket. The fan is then locked in the desired horizontal and vertical position. The separate control switch with stat enables the fan to be switched off or blow air only. For blow only the thermostat should be set at maximum. It also has two heat settings 1.5kW or 3kW. It can be fixed to the wall below the fan but out of draughts, sunlight and other heat sources. Wiring the fan and control are described below. Thermostat Control 2 Heat Settings Including Cool Blow Wall-Mountable Remote Thermostat Control Included Thermal Overload Protection Power-On Light Fixings Supplied Overheat Cut-Out Protection Mounting Height: 1.8 metres to 2.3 metres Bracket Adjustment: 40Deg vertical by 120Deg horizontal max Control Cable: 1.5mm 3 Core (not supplied) to the control Fan Cable: 1.5mm 4 Core (not supplied) between control and fan Control Dimensions: W170 x H60 x D102mm