Meaco 400i Swimming Pool Dehumidifier 58 litre per day extraction rate Wall mounted in adjacent room and ducted through the wall Comes with Wired Thermo Humidistat and Internal Backup Humidistat Plastic housing  Meaco\'s range of swimming pool dehumidifiers are the perfect solution to protect your swimming pool hall from damage caused by mold, damp, and condensation. The excess humidity can cause an array of problems leading to an unhealthy environment. The unit can be set up with many different options (detailed below) and can also be combined with your boiler to not only dry the air but also heat it via the low pressure hot water system. This can add up to 2.9kW of heat to the pool area. The Meaco swimming pool dehumidifiers are very energy efficient with the energy consumption rated as low as 0.510kW/L. This means they are not only cheaper to run than some other units but they are also packed full of features and optional extras so you can tailor the dehumidifier to your exact requirements.  The dehumidifier will need to be wall mounted in an adjacent room and ducted through the wall. As a guide, if the air temperature is at least 2°C warmer than the water temperature and you use a swimming pool cover then the Meaco 400i can control the humidity for a pool with a surface area of around 30 square meters.      Features: Protects swimming pool areas from damp, mould, and condensation Wall mounted in adjacent room and ducted through the wall An excellent 58 litre per day extraction rate Low energy consumption (0.510kW/L) thanks to an energy efficient rotary compressor Low noise level (47dB(A) at one metre) Comes with Wired Thermo Humidistat and Internal Backup Humidistat Plastic housing