The Vintage Wire Arches Are A Real Hallmark Of Our Uk Manufacturing Excellence, Constructed Using High Strength 12mm Thick Solid Steel For The Uprights And Curved Rails And 10mm Diameter For The Cross Linked Horizontals. each Arch Is Made Up From 4 Fully Welded Sections Connected Using Precision Turned Solid Steel Joiners Which Lock The Sections In Place With Stainless Steel Screws. Available In 3 Sizes - 1.2m/3ft 11\" Wide X 2.21m/7ft 3\" High, 1.5m/4ft 11\" Wide X 2.36m/7ft 9\" High And 2.0m/6ft 7\" Wide X 2.61m/8ft 7\" High - All Measure 0.5m/1ft 8\" Deep. the Vintage Garden Arch Is Powder Coated Matt Black Which Includes A Zinc Phosphate Treatment For Corrosion Resistance And Superior Paint Adhesion. The Arch Carries A Reassuring 10 Year Guarantee, This Ensures Years Of Life Without The Worry Of Structural Failure Caused By Corrosion, Which Is Unfortunately So Often The Case With Inferior Thin Walled Tubular Products.the Arches Have A Fixing Plate At The Bottom Of Each Side Of The Arch Which Can Be Secured To Decking, Sleepers, Concrete Or Paving Using Suitable Fixings (not Supplied But Available From All Good Hardware Stores).if You Are Planning To Fit The Arch Into Open Ground Then We Recommend Securing The Arches With The Substantial Galvanised Floor Fixing Pins Which Are Available Separately (select Arc-302 Above). These Are Supplied As A 4 Pack For Each Arch And Secure Through The Fixing Plates And Into The Ground By 40cm/16\". For Extra Rigidity, Set The Fixing Plates And Pins In Concrete With The Base Of The Arch Approx. 50mm Below The Surface.for Particularly Soft Ground Conditions Such As Soil Or Turf, We Advise Using Our Optional Ground Anchors, Supplied As A Pack Of 2 Anchors For 1 Arch, Select Arc-480 Above. These Are Inserted Into The Ground And The Arch Fixing Plate Can Then Be Secured To The Anchor. The Ground Anchor Provides Substantial Rigidty And Inserts 40cm Into The Ground. Please Note, When Buying The Ground Anchor You Do Not R