Module parameters Scope High power LED constant current driver rechargeable lithium batteries including ferroelectric 4V 6V 12V 14V 24V battery charging nickel cadmium nickel metal hydride batteries battery charging solar panels wind generatorsInput voltage 7 40VOutput voltage continuously adjustable 1 25 35V applied to the input voltage is higher than the output voltage applications can boost Output Current 8A 10A maximum time within the power tube temperature exceeds 65 degrees please add cooling fan 24V 12V 5A turn within generally be used at room temperature without a fan Constant Range 0 3 10A adjustable module over 65 degrees please add fan Turn lights Current current value 0 1 turn the lamp current and constant value linkage such as constant value of 3A turn the lamp current is set to a constant current of 0 1 times 0 1 x 3A 0 3A when the constant 2A when adjusted to the current value then turn the lamp current constant current of 0 1 times 0 1 x 2A 0 2A This version is a fixed 0 1 times actually turn the lamp current value is probably not very accurate is full of instructions for charging Minimum pressure 1VConversion efficiency up to about 95 output voltage the higher the efficiency Operating frequency 300KHZOutput Ripple about the ripple 50mV without noise 20M bandwidth for reference Input 24V Output 12V 5A measuredOperating temperature Industrial grade 40 ℃ to 85 ℃ please note the actual use of the