Jonsbo offers a lot of space for powerful hardware and puts especially graphic cards in the limelight with its three vertical PCI slots. The U5 S has a discreet exterior with brushed aluminium and a side panel made of tempered glass. The innovatively designed interior offers interesting design options and uses the chimney effect for optimized cooling.The features of the Jonsbo U5 S Midi-Tower at a glance:Chic housing with aluminium panels and tempered glassSuitable for mainboards from Mini-ITX to ATXVertical installation of the graphics cardSpace for a 240 radiator in the lidUp to six fans in total possibleFor up to 2x 3.5/2.5-inch and 2x 2.5-inch drivesJonsbo U5 S: Effective cooling thanks to chimney effectTo preserve the smooth front of the U5 S, Jonbo has opted for the chimney effect for this midi tower: three 120mm fans can be installed at the bottom of the housing and two at the top. The case feet lift the chassis so that the three optional fans at the bottom can generate an effective air flow. A further 120mm fan can be installed on the rear wall.The chassis supports CPU coolers with a maximum height of 160mm, so that many large tower coolers are supported. Those who prefer water cooling can install a 240mm radiator on the lid. There is space for a 120mm radiator at the rear. To keep the interior clean, there is a magnetic dust filter at the bottom of the housing and the lid is also covered with a grid.Space for drives and componentsMainboards in Mini-ITX, Micro-ATX or ATX format can be mounted on the mainboard tray. There is also plenty of space for graphics cards with a maximum length of 350mm. The Jonsbo U5 S is suitable for models with an overall height of 3 slots and has three vertical expansion slots for this purpose. Additional expansion cards are not considered for this case.In the Jonsbo U5 S, the ATX power supply unit is mounted on the lid in the front of the case and the power cable is routed internally to a connection on the rear of the case. All drives are mounted on the back of the mainboard tray. There is a double support for two 3.5\" and 2.5\" drives and two positions for attaching 2.5\" SSDs. The I/O panel offers one 3.5 mm jack socket each for headphones and microphone as well as two USB 3.0 type A connectors.Technical details:Dimensions: 219 x 440 x 418 mm (W x H x D)Material: aluminium, steel, tempered glassweight: 7,2 kgColour: silver (outside) / black (inside)Mainboard form factor: ATX, Micro-ATX, Mini-ITXFan (possible):2x 120 mm (cover)3x 120 mm (bottom)1x 120 mm (back side)Fan (pre-installed): noneDust filter: lid, bottomRadiators (possible):1x 240 mm (cover)1x 120 mm (back side)Drive bays:2x 3.5/2.5 inch2x 2,5 inchPower supply unit: ATX (optional)Expansion slots: 3 (triple slot, vertical)I/O panel:2x USB 3.0 type A2x 3.5 mm jack (3-pole, TRS, Audio-In/-Out)Maximum CPU cooler height: 160 mmMaximum graphics card length: 350 mm