The Aurora by IN WIN is a sophisticated RGB LED fan in 120mm format which extends the range of the enthusiastic manufacturer and provides unique lighting effects and efficient cooling performance. A special feature is that several Aurora RGB aluminum fans can be conveniently connected in series due to their modular connection design. This allows a substantially clean cable management. The quiet operation is also ensured by the black rubber dampers, which eliminate unwanted vibrations.The IN WIN Aurora RGB LED fan at a glance:- Three stylish RGB LED fans in 120 mm format- Air flow rate of 40 CFM @ 1,400 rpm- Air pressure of 1.5 mm H2O @ 1,400 rpm- Volume of 30 dB (A) @ 1,400 rpm- Modular connection design for connecting multiple fans- Compatible with ASUS AURA Sync and MSI Mystic Light Sync- Includes controller and an RGB strip- High life expectancy of 36,000 hoursPowerful RGB LED fan in 120 mm formatThe Aurora fan delivers optimal cooling performance with quiet operation. The fan rotates in the PWM mode at 800 to 1,400 revolutions per minute and produces an excellent air flow rate of up to 40 cfm and an air pressure of 1.5 mm H2O . Using the software, the fan can be regulated in seven speed levels, up to a turbo of 2,000 rpm . The fans are controlled via the enclosed controller. A special feature of the Aurora fan is the ability to connect several of these fans in series, so only very short connection cables and a power connection must be used. The fans have a special 6-pin connectorand are also delivered with a short 100 mm and a long 800 mm cable . The first fan in the series must be connected to the controller. The required 4-pin connection cable is included.Stylish LED lighting with direct control via the mainboardThe RGB LED lighting integrated into the center of the fan produces impressive light scattering and enables numerous lighting modes. Control is via the software of the respective motherboard manufacturer. Supported are ASUS Aura Sync and MSI Mystic Light Sync . Thus, the fans can adapt to the ecosystem of the gaming machine. In addition, the RGB lighting can be adjusted via the software, including 22 effects, 8 speed levels and 6 brightness levels. Technical details:- Dimensions: 120 x 120 x 25 mm (W x H x D)- Material: plastic, rubber- Colour: Black (Suspension, Rubber) / Gray, Translucent (Rotor Blades) / Black / White (Frame)- Fan Bearing: Sleeve Bearing- Speed: 800 - 1,400 rpm (maximum 2,000 rpm in turbo mode)- Volume: max. 30 dB (A) @ 1,400 rpm- Delivery volume: max. 40 cfm @ 1,400 rpm- Air pressure: max. 1.5 mm H2O @ 1,400 rpm- Lighting: RGB- Voltage: 12V- Connection: 6 pinContents - 3x Aurora RGB fan - 1x controller - 1x RGB LED strip - 4x mounting screws - 1x RGB Y-cable (motherboard to fan) - 1x 8-pin connection cable (100 mm, fan to fan) - 1x 4-pin header- Life expectancy: 36,000 hours / 40 C- Warranty: 2 years