Alpenf�hn has won over most demanding customers over the years with their range of first-class Wing Boost series fans. The Wing Boost 3 RGB combines the many advantages of its famous predecessors with a circular ring of digitally addressable RGB-LED lighting in its outer frame. The name \"Wing Boosts\" consist of small raised areas on the impeller intake side of the blades that help reduce air turbulence. The fan therefore operates at lower noise levels than conventional fan designs would allow. The Features of the Alpenf�hn Wing Boost 3 RGB Fan at a Glance:140 mm fan with digitally addressable RGB lightingHydrodynamic bearings for maximum performance, quiet operation and increased durabilityOptimised fan blades deliver the perfect balance between static pressure and airflowOperates at 400 to 1500 RPM4-Pin PWM connectionCompatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome Wing Boost 3 RGB: Powerful 140 mm FanThe Wing Boost 3 RGB is a PWM-controlled, 140 mm fan that is equally at home operating as a case fan, CPU cooler or radiator cooler. The fan operates at between 400 and 1500RPM, producing a massive airflow of 100,6 m/h with a static pressure of 2,19 mm H2O. The hydraulic bearings reduce operating noise to a minimum and this is then combined with the rubber decouplers built into the fan frame to guarantee whisper-quiet operation, even at low RPM speeds. At full speed, the Wing Boost 3 RGB produces a maximum 19 dB. Addressable RGB-LED Lighting in the FrameThe Alpenf�hn Wing Boost 3 RGB is equipped with digitally addressable RGB-LED lighting in the frame. The manufacturer integrated a glowing ring capable of producing 16,8m colours into the fan frame, which produces a delicate light on the impeller and can be connected to the motherboard or corresponding controller via a 3-pin RGB connector. The Wing Boost 3 RGB is compatible with ASUS Aura, Gigabyte RGB Fusion, ASRock Polychrome RGB and MSI Mystic Light. Thanks to the Y splitter integrated in the PWM connector, up to three Wing Boost 3 fans can be connected in series and controlled via a single PWM slot on the motherboard. In addition, an adapter is included that can power the fan via Molex to 2-pin, but then without the ability to control the speed. Technical Details: Dimensions: 140 x 140 x 25 mm (W x H x D)Material: plastic, rubberColour: BlackVolume: max. 19 dB(A)Speed: 400 - 1.500 rpmAirflow: max. 100.6 m/hVoltage: 12 VVoltage range: 7 - 13,2 VRated power: 1.32 Winput current: 0.11 AConnection:4-pin PWM3-pin RGB (5VDG)Lighting: digitally addressable RGB LEDs (16.8 million colours)Includes:1x Alpenf�hn Wing Boost 3 RGB4x Screws4x Decouplers1x Cable extension1x 7V voltage adapter (Molex/2-pin)