The Spectre 2.0 Elite Kit Front by Singularity Computers is a Distro Plate optimised for the Spectre 2.0 case. The large Distro Plate made of transparent acrylic glass can be mounted on the left side of the Spectre 2.0 case. A 360 mm radiator can then be attached to the rear of the bracket. It has a large recess intended for vertically mounted graphics cards with cooling blocks from EK Water Blocks for NIVIDIA\'s GTX 1080 and upwards. The G1/4\" connectors of the Distro Plate are positioned at the same height as the ones on the water blocks. Technical details:Material: Acrylic Glass / AluminiumColor: Transparent / BlackConnections: 6x G1/4 inchCompatibility: Singularity Computers Spectre 2.0 (Black)Scope of delivery:1x Spectre Elite Kit Side Manifolds1x Mounting frame2x Sealing plugsMounting materialCompatibility:This Manifold was designed for standard width GPUs with the full water-block width of 140mm. EKs standard water-block full width is 128mm and if you remove the ports side cover it is 124mm. There is a margin before the GPU water-block ports reach the manifolds height so it is possible for wider GPUs to fit. Nothing is impossible, but use wider GPUs at your own risk. Port alignment for the GPUs is for EKs current standard GPU water-block port positions. We recommend using EK standard water-blocks with this manifold. Water-blocks for non standard PCB GPUs and other brands can be used but the ports may not align exactly which means using more fittings.