Nikwax TX.Direct Wash-in - 300ml Bottle Adds Durable Water Repellency and revives breathability - in a washing machine. Anyone who is active outside in damp or wet conditions will benefit from breathable waterproof clothing. Whether you’re a mountaineer, cyclist, dog walker, or you work outside as a farmer or surveyor, you will need good waterproof outerwear to keep us dry. However, a good waterproof fabric must allow moisture vapour to pass through it, or \'breathe\'; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. A durable water-repellent (DWR) finish is applied to the outermost surface of waterproof/breathable clothing and equipment during manufacture. It prevents the fabric from absorbing moisture by making water bead up and roll off. This minimizes condensation forming within and maximizes breathability. However, the DWR finish is not permanent and needs to be maintained to optimize performance. Dirt will also attract water and reduce the beading-up of droplets on the fabric\'s surface. Nikwax TX.Direct adds Durable Water Repellency (DWR), which prevents water absorption, whilst maintaining breathability, keeping you dry and comfortable. Safe for use on Gore-Tex®, Sympatex®, Entrant®, Ultrex®, and TriplePoint® fabrics.  * Never use liquid detergents or fabric softeners. Wash the garment in Nikwax Tech Wash non-detergent soap. Detergents can leave water-attractive residues that will not rinse out.  Watch this short video to know more about Nikwax TX.Direct Wash-in: Features: Wash-in treatment completely immerses garments assuring that no areas are missed.  Reduces the water-absorbency of the outer fabric, optimizing breathability  Heals micro-cracks by sealing leaky areas  Lasts several washings  Safe on Gore-Tex®, Sympatex®, Entrant®, Ultrex®, and TriplePoint® fabrics Product of choice of professional Outdoor trainers. 300ml / 10.5oz bottle is suitable for 3 garments. How to use TX.Direct Wash-in: Your raingear could be soaking up water just because it is dirty. First, try cleaning them with Nikwax Tech Wash, and if they are fairly new, or recently re-waterproofed with Nikwax Cotton Proof, the Durable Water Repellency (DWR) will be revitalised just from cleaning. Once the garment has been thoroughly worn, you will need to add DWR using Nikwax TX.Direct: Washing Machine For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions. Remove all detergent build-up from the detergent dispenser. Place clean garment(s) in washing machine (maximum 2 items). Use 100ml / 3.5oz for 1 garment, and 200ml / 7oz for 2 garments. Run 30°C synthetic cycle and slow spin. Nikwax TX.Direct treated clothing needs no heat to develop Durable Water Repellency (DWR), so it is not necessary to use a tumble drier for best results. As garments with taped seams get older the tape adhesion weakens, becoming more fragile and susceptible to heat, so it is best to avoid tumble drying. Air dry or tumble dry on a low setting if care label allows. Do not machine-wash garments if taped seams have become dislodged.* To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying. Hand Wash For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions. Use gloves (to avoid waterproofing your hands!). Immerse clean garment(s) in 6L  /  203oz  hand-hot water in sink or bowl. Use 50ml / 1.75oz for 1 item and 100ml / 3.5oz for 2 items. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly. Rinse with cold water until water runs clear. Nikwax TX.Direct treated clothing needs no heat to develop Durable Water Repellency (DWR), so it is not necessary to use a tumble drier for best results. As garments with taped seams get older the tape adhesion weakens, becoming more fragile and susceptible to heat, so it is best to avoid tumble drying. Air dry or tumble dry on a low setting if care label allows. Do not machine-wash garments if taped seams have become dislodged.* To maintain waterproofing always wash with Nikwax Tech Wash. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying. Nikwax Product Ethics: Nikwax takes great care to minimise the effect of Nikwax waterproofing products on the environment and on you, the consumer. Nikwax waterproofing products are WaterBased, Non-aerosol, Non-flammable, Non-hazardous, and Environmentally Friendly. Zero PFC - Completely free of fluorocarbons (which have been shown to be persistent in the environment and have been associated with serious health issues). Nikwax waterproofing products contain no harmful solvents or volatile organic compounds (VOCs) Cotton Care: Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct.