Whether you’re building a rabbit hutch, or covering your bedroom wall with posters, this Tacker will rise to the challenge.Thanks to the versatility of this 2-in-1 tacker, you can load it with staples or nails to suit the task at hand.Tacking Strength AdjustmentSimply turn the adjustment nozzle to select the desired tacking strength for your project.The soft grip handle promotes comfortable use and minimises the chance of operational fatigue.Generous CapacityThe strip magazine fits 100 X staples and 100 X nails – minimising the need for replenishment.The tacker is compatible with 18 gauge, 5.7mm (1/4”) narrow crown staples (equivalent to type 90, No.90 Narrow Crown) and 18 gauge 2mm (1/16”) crown brad nails (equivalent to Tacwise 18G, Arrow BN18, Bostitch 18G & Rapid no. 8 brad nails) of the following lengths:Staples – 15mm (9/16”), 16mm (5/8”), 18mm (5/7”), 19mm (3/4”), 21mm (13/16”), 22mm (7/8”), 25mm (1”)Nails – 15mm (9/16”), 16mm (5/8”), 21mm (13/6”), 25mm (1”), 30mm (1-3/16”), 32mm (1-1/4”)The tool comes with 300 X 19mm staples and 100 X 25mm nails, so you can get started right away.Intuitive DesignAs the name suggests, the anti-jam mechanism prevents jams, but it also prevents delays in use – processing staples or nails through the machine effortlessly. With a firing speed of 20 per minute, you could have your entire project complete in no time.Features low recoil levels for smooth controllable nailing.Contact safety switch prevents accidental firing, so you can use the tacker with confidence.SpecificationVoltage: 220 – 240V ~50HzRated Current: 9ARated Firing Speed: ≤20pcs/minStaple Loading Capacity: 100pcsNail Loading Capacity: 100pcsStaple SpecificationWire Spec: W1.25x T1.0mmCrown Width: 5.7mmStaple Length: 15 - 25mmBrad Nail Specification:Wire Spec: W1.25x T1.0mmBrad Crown Width: 2.0mmNail Length: 15 - 32mmSKU: 15-389