Arctic Freezer A13 X CO Compact Heatsink & Fan AMD AM4 Continuous Operation Dual Ball Bearing 150W TDP 6 Year Warranty Compact AMD CPU Cooler for Continuous Operation     Ready to cool your AMD CPU     Small Footstep for Optimal Compatibility     Pre-applied MX-2 Thermal Paste     Longer Lifespan thanks to its Low Motor Temperature     Offset Heat Pipes enable Optimal Heat Dissipation     P-fan for Increased Performance     Double Ball Bearing for Continuous Operation     Direct Touch Heat Pipes     More Cooling Capacity with Freezer A13 X CO     More Efficient and Whisper Quiet     Multilingual Manuals Ready to cool your AMD CPU   The ARCTIC Freezer A13 X CO is a compact CPU cooler with one 92mm fan. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly improve the Freezer A13 X COs cooling performance. With the use of a double ball bearing it is designed for continuous operation and is therefore also suitable for 24/7 operations. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple assembly system. Small Footstep for Optimal Compatibility   The Freezer A13 X CO combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer A13 X CO has an installation height of only 137 mm and there are no limitations in RAM compatibility. Pre-applied MX-2 Thermal Paste   Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly. Longer Lifespan thanks to its Low Motor Temperature   The Freezer A13 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer A13 X CO. Offset Heat Pipes enable Optimal Heat Dissipation   The direct touch heat pipes attached to the Freezer A13 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air. P-fan for Increased Performance     Inspired by the P-series, the Freezer A13 X COs fan benefits from all of the advantages of P-fans:      - High static pressure for increased cooling performance      - Broad RPM range      - Lower power consumption      - Less vibration      - PWM for synchronous fan control Double Ball Bearing for Continuous Operation   The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. Direct Touch Heat Pipes   The Freezer A13 X CO uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes. More Cooling Capacity with Freezer A13 X CO   The ARCTIC Freezer A13 X CO sets new standards in cooling. Compared to its predecessor, a performance increase could be tested. More Efficient and Whisper Quiet   In addition to operating more quietly, even at maximum speed, the Freezer A13 X COs built-in fan motor is also much more efficient. The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective savings of 60 in power consumption. ARCTIC engineers were also able to reduce the volume by 40 , allowing the Freezer A13 X CO to run at a whisper-quiet 0.3 sone when at maximum speed. Multilingual Manuals   ARCTIC offers a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions. Specification Type: Heatsink and Fan AMD/Intel: AMD Compatibility: AM4 TDP: 150W Fan Connector(s): 4-pin #Hide#LED Lightin No Colour: Black LED Lightin - Material: Aluminium Fins Copper Heatpipes Weight: 443 g Fan Dimensions: 1 x 92mm Dimensions: (LxWxH) 86 x 109 x 137 mm Fan Controller: PWM Rotation Speed: 2000 RPM Fan Bearin Dual Ball Bearing Noise level: 22.5 dBA Power: 0.09 A Additional Features: See Overview Package Type: Retail Package Weight: 0.5400 kg Warranty: 6 Years #Hide# AM4 Socket: Supports Socket AM4