Draytek VigorAP 912C 802.11ac Wave 2 Dual-Band Access Point Ceiling Mesh Wireless 802.11ac Range Extender & Access Point VigorAP 912C is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it. The VigorAP 912C is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling. Initial setup of the VigorAP 912C is easy with the DrayTek Wireless app, whether its creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout. Manage the VigorAP 912C centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 912C has the flexibility to be used how you need it. Frequency Band     2.4 GHz, 5 GHz Wi-Fi AC Rating     AC1200 Form Factor     In-ceiling Connectivity Technology     Wireless Data Transfer Rate     866 Mbps Data Link Protocol     IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2 Remote Management Protocol     SNMP 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI, TR-069 Performance     Maximum data rate (2.4 GHz): 300 Mbps ¦ Maximum data rate (5 GHz): 866 Mbps Wi-Fi Rating     AC1200 Features     Power over Ethernet (PoE), repeating mode, Syslog support, MAC address filtering, Wireless Distribution System (WDS) support, firmware upgradable, wall mountable, Mesh networking, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS), Multiple SSID support, hidden SSID, reset button, 2T2R MIMO technology, DHCP client, tagged VLAN, band steering, Airtime Fairness, Multi-User MIMO & Beamforming technology, AP-Assisted Roaming, Wireless Auto On/Off, Multi-SSID over Mesh, Client Limit per SSID, Trusted DHCP Server IP for WLAN, Device Object/Group Control Encryption Algorithm     TLS, PEAP, WPA2, WPA2-PSK, WEP, WPA3 Authentication Method     RADIUS, Radio Service Set ID (SSID) Compliant Standards     IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac Wave 2 General Device Type     Radio access point Width     16.2 cm Depth     16.2 cm Height     4.2 cm Weight     300 g Aerial Antenna     Internal Expansion / Connectivity Interfaces     1 x 1000Base-T (PoE) - RJ-45 Miscellaneous Included Accessories     Ceiling mounting kit, T-Rail mounting kit Cables Included     1 x network cable Power Power Over Ethernet (PoE) Supported     PoE Power Device     External power adapter Voltage Required     AC 100 - 240 V Power Consumption Operational     10 Watt Manufacturer Warranty Service & Support     Limited warranty - 2 years Environmental Parameters Min Operating Temperature     0 °C Max Operating Temperature     45 °C Humidity Range Operating     10 - 90 (non-condensing)