Inspired by tradition and constructed using time-proven techniques, this fabulous potting shed offers the perfect combination between greenhouse and shed, offering the best of both worlds for gardens or allotments where space is in short supply. For those who already have greenhouses, it also makes a great dedicated space to pot up cuttings and plant seeds, where all tools and growing compounds can be within easy reach. Complete with 3mm toughened safety glass as standard, this traditional wooden potting shed is suitable for those with young families. Manufactured with quality redwood pine, this Swallow Rook Potting Shed comes complete with 2 shelves to the rear elevation and a full length shelf to the glazed elevation with plenty of space beneath for storing compost, pots and propagation trays. Bayliss Autovents are also supplied as standard, to prevent your potting shed from overheating. To further aid ventilation, there is also an opening window to the end elevation. All timber is kiln dried and placed in a special oven where a compressor removes the air. At 215 degrees C the timber is baked which not only gives the timber a nice consistent colour throughout but also seals the capillaries, destroys resins and proteins and stabilises the timber. This means it can be left untreated for longer and that any paint you apply applies much easier, lasting in turn up to 3 times longer than wood that has not been treated. If you are really serious about gardening, then the Swallow Rook Wooden Potting Shed would make a great investment and comes complete with a 10 year guarantee on the frame and base for total piece of mind.  The redwood pine glazing bars are 58mm x 32mm finished size All boards are 12mm finish tongued and grooved and fixed with stainless steel nails All the timber is green tint tanalised pressure treated The inward opening door has a mortise lock and aluminium handles Glazing is toughened safety glass All the glazing is slid into a groove and sealed with quality silicone All the cut shapes are jointed with a clear plastic H section Each roof vent has an Automatic opener Full length staging down one side with centre support (width 520mm, height 745mm) There is a specially turned apex finial for that classic look The ridge and top vents are sealed with a specially machined timber capping A 20mm black PVC section is screwed to the bottom, called the damp barrier