The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You\'ll achieve professional results from an easy-to-spray aerosol. Spray Passes: 1-2 spray passes with 50% overlap. Approx. 1.2 mil per spray pass. 3-7 minutes flash between coats, depending on temperature. Drying: Full cure in 12 hours at 68 degrees F, 35-40 minutes at 140 degrees F (IR drying) Pot Life: Approximately 48 hours after button is pushed and can is activated. Ideal application conditions: Temperature between 70-85 degrees F at 50% humidity or less. Application: Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached. After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.