Enjoy professional cutting power on small and medium metal fabrication projects by choosing the Eastwood Versa-Cut 40. This portable plasma cutter has a 40-amp adjustable output to cleanly slice through steel between 24-gauge and 3/8-inch thick. You can also use it on stainless steel and aluminum. The Versa-Cut 40 weighs just 36lbs (16.33kg) requiring only 5-7 CFM of compressed air and can be plug into a 110-volt or 220-volt power input. This combination means you can take your Eastwood plasma cutter anywhere it’s needed. Whether you’re a passionate about restoration, industrial maintenance or metal art the Eastwood mid-duty plasma cutter is a must for your workshop. The Trafimet CB50 torch has a 20-foot cable for maneuvering as you create intricate cuts that mechanical cutters can’t match. A 60% duty cycle gives you plenty of time to complete long cuts and it’s backed by  the impressive 3-year Eastwood warranty. NOTE : Always wear eye, hand and face protection when using a plasma cutter. SPECIFICATIONS Amperage Output Range: 14-40 Amps Output Voltage: 96 V Weight: 29 Lbs / 15KG Duty Cycle: 60% @ 40A Overall Dimensions: 20.0\" (508 mm) x 9.75\" (248 mm) x 20.0\" (508 mm) Electrical Input:110 VAC or 220 VAC Air Requirements: 5-7 CFM@ 20-60 PSI Contents of UK package Model BY12740 High Frequency Plasma Cutter with Inverter Technology Torch and 20 ft supply line 10 ft Ground Lead with clamp Welding Shield and wire brush Spare cutting nozzle Instruction Booklet Required items A clean dry air supply from a compressor capable of delivering 5cfm at 85psi. 220-240 volt 13amp supply from a 30 amp ring main. Well ventilated work area Non flammable safety clothing and boots Welding gloves (Frost Welding gauntlets or similar) Auto Darkening Welding Helmet