With The Eastwood 4\" X 16\" Mini Mill You will be able to accomplish projects that simply are not possible without a milling machine. Now you can accurately Slot, Drill, Chamfer, Bevel, Face and Plunge Cut with this one machine. The tilting column allows for accurate angle work to be done and the Large R8 Taper accommodates common tooling. We\'ve even included an 3/8\" Collet and end mill so you can begin machining right out of the box! Product Features: Home workshop-friendly size Accurately, Slot, Drill, Chamfer, Bevel, Face and plunge cut Tilting column allows for accurate angle work Large R8 Taper accommodates common tooling 0-2500 RPM Motor Control with a 2 Speed gearbox The Eastwood 4” X 16” Mini Mill is a highly capable machine able to perform as a Drill Press with up to 1/2” drill shank capacity and as a fully functional manual Milling Machine with up to 5/8” end mill capacity (3/8” included). The 2 axis Table, along with a 45° left or right tilting column design, allows drilling or milling virtually any surface. A 0-2500 RPM Motor Control with a 2 Speed gearbox provides the versatility to accommodate most materials. The standard R8 Taper arbor will accept a wide variety of Collets, Drills and other accessories. Contents: (1) 4” x 16” Milling Machine with installed Drawbar and R8 Taper ½” (13mm) Drill Chuck (1) Chip Shield (Installed) (1) Drill Chuck Key (2) Handwheel Handles (1) Spanner Wrench 38-42mm (1) Spanner Wrench 45-52mm (1) Wrench 8/10mm (1) Wrench 14/17mm (1) Wrench 17/19 mm (1) Wrench 36mm (1) Spare Fuse 5 Amp (2) T Nuts M10-1.5 (1) Spindle Locking Pin (1) Set of 4 Hex Keys (1) Oil Bottle (1) 3/8” R8 Collet (1) 3/8” End Mill (1) Eastwood Instruction Manual Product Specifications: Spindle Travel: 5 inches Swing: 12-3/4 inches Longitudinal Table Travel: 7-5/16 inches Cross Table Travel: 4 inches Head Travel: 7-1/2 inches Head Tilt: Left and Right 45 deg Maximum Distance Spindle to Column: 6-3/8 inches Maximum Distance Spindle to Table: 11-1/2 inches Drilling Cap for Steel: 5/8 inch Range of Vertical Spindle Speeds: 0 – 1100, 0 – 2500 RPM Quill Dial: 1.580 inch Table Length: 15-3/4 inches Table Width: 3-5/8 inches Number Of T Slots: 3 T Slots Width: 0.465 inch T Slots Height: 5/8\" T Slots Centers: 1-1/8 inches Stud Size: 5/8 inch Spindle Taper: R8 End Milling Cap: 1/2 inch Face Milling Cap: 1-1/8 inches Draw Bar Diameter: 12 mm Draw Bar TPI: M12 -1.75 Draw Bar Length: 4 inches Spindle Bearings: Permanently Sealed Ball Bearings