The Eastwood Rust Encapsulator   stabilises rust and prevents further rusting and can be used were rust cannot be removed. Can be top coated with virtually all paint systems. Stop rust in its tracks! Eastwood Rust Encapsulator is ideal for parts on project cars that have started to rust, but would be very difficult to replace or fabricate. Simply spray it onto springs, frames, panels and other parts. On properly prepared surfaces that are free of oil and grease, this product seals and stops rust and corrosion from spreading. When tested against well-known brands, Eastwood Rust Encapsulator has proven to be superior in resisting sunlight, preventing rust creep and promoting overall durability. And by using a spray can, you can get to the nooks and crannies that are prone to rusting yet are hard to completely cover with a brush or paint gun. Buy it together with our 1-quart cans of heavy-duty anti-rust and you’ll have a full solution to stop rust from eating away at your vehicle. We fortify our over-rust aerosol with an epoxy that helps it stick to the metal and also helps topcoat paints adhere to the encapsulator, or you can leave it as it is for a cool OEM-black look on your suspension or chassis. The latest formulation is strongly heat-resistant to handle the high operating temperatures of a vehicle and will cure quickly so you can resume your project work. Heat resistant up to 204°C. Aerosol is available in Black, Red and Silver. - Encapsulates rust and primes in one step - Minimal prep: remove loose rust, degrease, and apply - Compatible: with most top coats. - Convenient: use it over or under body fillers and under lacquer, enamel, and urethane; perfect for filling pinholes and other surfaces irregularities - Proven: tested to be more effective than other brands in UV resistance, it excels at preventing rust creep, and has outstanding overall durability - Preventative: stabilises rust and protects against further rusting - Versatile: spray from the high-solids aerosol, or brush directly from the can - Safe: acid, lead, and chromate-free. Contains no isocyanates. - Heat resistant up to 204°C. US Quart ONLY available in Black. Instruction: Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Brush-apply directly from the can, or thin 20% with lacquer thinner to spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers. Eastwood Rust Encapsulator Aerosol is also available in Black, Red and Silver.