Tripp Lite's 2-Metre multimode duplex Fibre Channel SC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on one end and LC at the other a PVC jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10Gbps networks as well. Also available in 1 3 5 10 15 20 30 and 50 Metre lengths. Search "N516-" to bring up all lengths. Also search "N506-" for SC-SC cables and "N520-" for LC-LC cables. - Multimode duplex (50/125) fiber patch cable - Attenuation loss meets or exceeds the latest industry standards - Higher bandwidth optimized for gigabit and 10Gbps networks - Backward compatible with 62.5 micron fiber - Built-in headroom for future applicationsSystem Requirements - Any fiber optic hardware or NIC card requiring multimode duplex cable with LC/SC connectors - 2M duplex MMF cable LC/SC 50/125 fiber - Constructed with 50/125 micron cable - Length - 2M - Use on fiber and fibre channel installations - SC male to LC male connectors - Higher bandwidth optimized for gigabit and 10Gbps networks - Backward compatible with 62.5 micron fiber - Built-in headroom for future applications - Number of fibers: 2 - Fiber type: all glass graded index - Core diameter: two 50+/-3 microns - CLAD diameter: 125+/-2 microns - Primary coating diameter: 245+/-15 microns - Primary coating material: acrylate - Secondary coating diameter: 900+/-50 microns - Secondary coating material: PVC - Attenuation @850NM: 3.5DB/KM maximum @1300NM: 1.0DB/KM maximum - Bandwidth @850NM: 220 MHz-KM minimum @1300NM: 600 MHz-KM minimum - Numeric aperture: .275 nominal - Proof test level: 100000 PSI - Insertion loss testing performed on every connector (0.2db typical) and provided with cable - Beveled edge on ends of glass makes insertion of plug a breeze