The B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lites B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors monitors or televisions. Its ideal for digital signs trade shows presentations classrooms churches retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. The receiver uses HDMI cable (see Tripp Lites P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results use 24 AWG solid-wire Cat5e/6 cable such as Tripp Lites N202-Series).The B126-2A0 can extend a 1080i (60 Hz) signal up to 60.96 m (200-ft.) a 1080p (60 Hz) signal up to 45.72 m (150-ft.) and a 3D signal up to 38.1 m (125-ft.) You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 213.36 m (700-ft.) (1080i) 152.4 m (500-ft.) (1080p) or 121.9 m (400-ft.) (3D).In addition to crystal-clear video the B126-2A0 delivers full rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall rack or pole using the included hardware.N/AN/A- Supports high-definition video resolutions up to 1080p (60 Hz)N/A- Supports stereo and 7.1-channel surround sound audioN/A- Works with all operating systems and HDMI video sourcesN/A- Plug and playno software or drivers to installN/A- Built-in equalization control lets you adjust monitor imageN/AN/A- Works in tandem with Tripp Lites B126-002 or B126-004 transmitter unitN/A- Extends a 1080i (60 Hz) signal up to 200 ft. a 1080p (60 Hz) signal up to 45.72 m (150-ft.) and a 3D signal up to 38.1 m (125-ft.) N/A- Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 213.36 m (700-ft.) (1080i) 152.4 m (500 feet) (1080p) and 121.9 m (400 feet) (3D) N/A- Connects to previous link in the chain with one Cat5e/6 cable (for best results use 24 AWG solid-wire Cat5e/6 cable such as Tripp Lites N202-Series)N/A- Works with all operating systems and HDMI video sources N/A- Supports HD resolutions up to 1080p (60 Hz)N/A- Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitterN/A- Supports 24-bit True Color (8 bits per channel) and HDCP N/A- Built-in equalization control lets you adjust the image on the local monitorN/A- Plug-and-play engineeringno software or drivers to download and install N/A- Connects quickly to monitors with HDMI cable such as Tripp Lites P568-Series N/A- LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chainN/A- Included mounting hardware lets you install the unit on a wall rack or poleN/A- International AC Adapter B110-INT required for use with UK European and Australian power connections